Straight Choral Riser - 2 Level with Hard Board Surface

SKU: RSHB

Availability: In stock

Quick Overview

Portable Choral Standing Risers are also easy to set-up and allow for quick arrangement for all performance venues. Units easily attach to one another to provide multi-level heights. Guardrails are recommended for safety.
Call Us - 1.888.524.2582 Mon-Fri 9am-4pm Central
$517.40
  • Buy 3 for $481.18 each and save 7%
  • Buy 5 for $465.66 each and save 10%

Details

STAGES AND RISERS Platforms are constructed with a ¾" thick solid plywood core, the riser shall be surfaced with Carpet. The edges of the platform shall be routed to allow the frame to fit flush with the top surface and cover the ends of the carpeting. The frame is 16 gauge, 1-13/16" high formed steel channel frame shall be reinforced with 16 gauge steel angle welded to the inside of the channel. The angle shall provide a continuous support to which the decking is secured with screws placed a maximum of 9" apart. The frame shall completely enclose the top, bottom and edges of the decking perimeter preventing the decking from becoming loose and damaged. All areas where frame parts are joined together shall be reinforce with steel plates attached with rivets. The leg structure is constructed if 1.05" diameter, 14 gauge steel tubing capped at the point of floor contact with high impact plastic glides. The vertical load bearing members shall be joined at the top by full width, steel tube to provide maximum support to the stage deck. The top of each leg assembly shall fold open and closed, using 16 gauge steel saddle clips that are secured with at least four screws. Leg assemblies shall be braced by friction type braces, equipped with a spring locking device to secure the legs in the open and closed position. Braces shall be secured to the leg assembly with rivets and to the deck using 8 screws installed through the decking. Legs shall open and close using only one hand. Gravity ring type brace locks are not acceptable. Stages and risers shall be equipped with drop-in couplings that allow units of the same or different heights to be joined together. All ganging devices shall be permanently secured to each unit. Ganging devices that is not permanently attached are not acceptable. All metal parts are to be finished with a black thermofused epoxy powdercoating. All metal parts shall be designed to carry a uniform live load of at least 200 lbs. per square foot. Portability Stages and risers shall be capable of being completely set-up and taken apart quickly, without the need for tools, by two people of average strength. Warranty Stages and risers shall be covered by 10- year warranty.

MANUFACTURER 'S WARRANTY: National Public Seating Corp. offers the original user a warranty against all manufacturing defects in material and workmanship. If defective, NPS will, at its option, repair or replace the defective product. This warranty does not apply to damage resulting from misuse, abuse or neglect. Authorization for return and/or repairs is required by contacting your dealer. This warranty gives you specific rights, and you may also have other rights which vary from state to state. Orders are accepted under the express agreement that under no circumstances will seller be liable for any incidental or consequential damages, or for any other loss, damage or expense of any kind, including loss of profits, arising in connection with the order or with the use or inability to use seller’s products furnished under the order. Seller’s maximum liability shall not exceed and buyer’s remedy is limited to either (i) repair or replacement of the defective part or product, or at seller’s option, (ii) return of the product and refund of the purchase price. Such remedy shall be the buyer’s entire and exclusive remedy.